Mikster DLM-080 Manuel d'utilisateur télécharger pdf (Page 23)

The DLM-080 FUTURE Digital Recorder – User’s Manual

26.11.2004

- keep pressing the keys in the display field of channel no. 4 until 5 is

shown

- press the key (parameters will be stored in memory)

switch to the SERVICE mode

- press the key (a diode built-in in the key blinks)

- press the key and hold it for approximately 3 sec.

(After 3 seconds the symbol F-00 will be displayed in the real-time display field.)

- keep

pressing the keys in the real time field until F-02 is shown

press the key (information specified in Point 3.6 will be displayed)

- keep pressing the keys in the display field of channel no. 1 until ch8

is shown

6- preset model signal (Iw=20mA) for Recorder terminals nos. 79,80

Iw=20mA

7- preset displayed value [100] for the I=0mA current

- keep pressing the keys in the display field of channel no. 4 until 100

is shown

8- preset displayed value [500] for the I=20mA current

- keep pressing the keys in the display field of channel no. 6 until 500

is shown

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Pas de commentaire

Mikster DLM-080 Manuel d'utilisateur Page 23